5052 Aluminum Strip / Slit Coil

Haomei Aluminum supplies 5052 aluminum strip slit from wider coils for stamping, roll forming and component production. Available in O, H32 and H34 tempers, the material combines corrosion resistance with practical forming and welding characteristics.

For coil-fed production, alloy selection is only part of the specification. Slit width, edge condition, thickness consistency and winding quality also affect how the strip feeds and forms.

Temper options: O, H32 and H34
Product form: Slit strip coil
Processing: Custom slitting & rewinding
Coil configuration: ID, OD and coil weight reviewed against your equipment requirements

Request a Quote

Narrow 5052 aluminum strip coils supplied after precision slitting — 5052 slit strip coils prepared to customer-specified dimensions.

5052 Aluminum Strip Specifications

Item	Typical Supply Range
Alloy	AA 5052 / EN AW-5052
Product Form	Slit aluminum strip supplied in narrow coils
Temper	O, H32, H34; other tempers subject to confirmation
Thickness	0.20–6.00 mm typical 5052 coil supply range;
Slit Width	Custom width. Around 10–500 mm is a common narrow-strip inquiry range; minimum and maximum widths depend on thickness and slitting setup
Slit Width Tolerance	Precision targets around ±0.10–0.15 mm may be discussed for suitable thickness and width combinations;
Edge Condition	Slit edge; deburring or additional edge requirements subject to processing confirmation
Burr Height	Controlled according to the agreed limit. Specify the maximum allowable height and measurement method if critical
Surface Condition	Mill finish; dry or lightly oiled condition according to order requirements.
Coil Inside Diameter (ID)	405 mm, 505 mm or 508 mm; other sizes subject to confirmation
Coil Outside Diameter (OD)	Customized according to the customer's decoiler and maximum handling dimensions
Surface Protection	Protective interleaving or other packaging protection according to surface and shipping requirements
Material Standard	ASTM B209, EN 485, GB/T 3880 or customer specification, subject to order confirmation
Packaging	Export-worthy moisture-resistant packaging, with coil protection and pallet or wooden case options according to shipment requirements

Specify Your 5052 Aluminum Strip Requirements

Have a drawing or an existing material specification? Send it with your inquiry. Include the required alloy temper, thickness, strip width, tolerances, coil ID/OD and order quantity so our team can review the processing requirements.

Request a 5052 Aluminum Strip Quote

5052 Aluminum Strip with Custom Slit Widths

5052 aluminum strip is a magnesium-alloy aluminum product supplied in narrow coil form after slitting from wider parent coils. It is selected for applications where corrosion resistance, formability and consistent strip dimensions are important to the manufacturing process.

At Haomei, we process 5052 aluminum coils into slit strips according to the required thickness, width, temper and winding configuration. Instead of supplying only standard coil dimensions, we work with customer drawings and processing specifications to prepare strip material for downstream stamping, forming and component production.

Depending on the intended application, the supplied coil can be configured with specified slit widths, inner diameter, outer diameter and packaging requirements.

For the wider parent material, see 5052 Aluminum Coil. For flat sheet products, visit 5052 Aluminum Sheet.

Multiple narrow 5052 aluminum strip coils after slitting — Slit strip coils for continuous feeding, stamping and forming.

Custom Slitting and Rewinding for 5052 Aluminum Strip

5052 aluminum coil being slit into narrow strips on an industrial slitting line

Aluminum Coil Slitting

Haomei processes wider 5052 aluminum coils through slitting lines to produce narrower strips for downstream manufacturing.

Custom-width 5052 narrow aluminum strip coils after slitting

Custom Slit Width

We produce slit strips in customer-specified widths according to the confirmed processing range.

Close inspection of a slit aluminum strip edge for cutting defects

Slit Edge Quality Inspection

Slit-edge condition is checked during processing to identify burrs, edge damage and irregular cutting conditions.

Burr height measurement on a precision slit aluminum strip edge

Burr Height Control

Burr height is an important consideration in narrow strip processing.

Narrow 5052 aluminum slit strips being rewound into finished coils

Rewinding and Coil Consistency

After slitting, individual strips are rewound into coils according to the specified winding requirements.

5052 aluminum slit strip coils showing the inner and outer coil dimensions

Customized Coil ID and OD

Coil inner and outer diameters can be specified according to the customer's unwinding equipment, handling conditions and production setup.

5052 Aluminum Strip Tempers: O, H32 and H34

For slit strip applications, temper selection is closely related to the forming process and required mechanical properties. Haomei offers 5052-O, H32 and H34 options, subject to material availability and the confirmed order specification.

Temper	Material Characteristics	Typical Considerations
5052-O	Fully annealed, softer condition	Applications requiring greater forming flexibility
5052-H32	Strain-hardened and stabilized condition	Applications balancing strength and formability
5052-H34	Higher work-hardened condition than H32	Applications requiring a higher strength level

The appropriate temper depends on strip thickness, forming depth, bending requirements and the mechanical properties specified for the finished component. See the 5052-H32 vs. H34 temper guide for a more detailed comparison.

5052 Aluminum Strip Chemical Composition

Alloy	Si	Fe	Cu	Mn	Mg	Cr	Zn	Ti	Others - Each	Others - Total	Al
5052	0.25	0.40	0.10	0.10	2.2–2.8	0.15–0.35	0.10	–	0.05	0.15	Remainder

Typical Mechanical Properties of 5052 Aluminum Strip

Alloy-Temper	Tensile Strength (ksi)	Yield Strength (ksi)	Elongation (%)
5052-O	28	13	20
5052-H34	38	31	8
5052-H38	42	37	3

Applications of 5052 Slit Aluminum Strip

Continuous Stamping and Metal Components

5052 aluminum strip can be supplied for continuous stamping and the production of formed metal components. Specified strip width and material temper help match the feeding and forming requirements of the production line.

Electrical Equipment and Enclosures

In selected electrical equipment applications, 5052 slit strip is used for fabricated brackets, enclosure components and other formed parts where corrosion resistance and dimensional consistency are relevant.

Marine and General Industrial Components

Due to its corrosion resistance, 5052 aluminum is also used in marine hardware and industrial components. Slit strip can be considered where the required component dimensions and forming process suit the material's temper and thickness.

Fuel and Storage Tanks

5052 alloy is used in fuel-related equipment and storage tanks where corrosion resistance and formability are relevant. Narrow strip is considered for selected formed components and parts made through continuous or repeatable processes.

Marine and Boat Hardware

5052 aluminum is used in marine hardware and selected boat components. Strip material may be suitable for formed brackets, fittings and other parts when the specified temper, thickness and design requirements are appropriate.

Architectural and Automotive Panels

5052 is used in selected architectural and automotive sheet-metal components, panels, brackets and enclosures. Slit strip can serve component lines that require a defined feed width or repeated forming operation.

For cable manufacturers: 5052 aluminum strip may be considered for selected cable-related applications, depending on cable construction, thickness and mechanical requirements. For application-specific material and processing information, visit our dedicated Aluminum Strip for Cable Armoring page.

Haomei Quality Control for 5052 Aluminum Strip

Thickness and Width Inspection

Strip thickness and slit width are checked against the dimensions specified for the order.

Slit Edge Inspection

Cutting edges are examined for burrs, edge damage and irregularities that may affect strip handling.

Coil Winding Inspection

Finished coils are checked for alignment, winding condition and specified coil dimensions before packing.

Quality inspection of slit aluminum strip dimensions and finished coil condition — Inspection of dimensions and finished coil condition.

Inspection Based on the Agreed Order Requirements

Where required, material properties and inspection records are checked against the applicable material standard and agreed order requirements. Additional requirements, such as a maximum burr height, specific width tolerance or coil dimension, should be stated before production.

Haomei does not treat a general processing description as a substitute for an agreed inspection criterion. Numerical acceptance limits should be confirmed for the specific order.

Why Choose Haomei for 5052 Aluminum Strip

Our work covers material specification confirmation, coil slitting, width adjustment, edge inspection and rewinding for industrial processing and component manufacturing.

Specified Strip Dimensions

Thickness, slit width and coil dimensions are confirmed according to order requirements.

Slitting and Rewinding

Wider aluminum coils are processed into narrow strip coils for downstream production.

Edge Quality Attention

Burrs, cutting-edge condition and strip consistency are included in processing checks.

Temper Selection

O, H32 and H34 options are evaluated according to the intended forming process.

Order-Based Specifications

Material dimensions, tolerances and winding requirements are confirmed before production.

Application-Oriented Review

Drawing, end-use and production-line details help clarify the material and coil configuration required.

FAQ – 5052 Aluminum Strip

What is 5052 aluminum strip?

5052 aluminum strip is a narrow-width aluminum product made by slitting wider 5052 aluminum coils. It is available in different tempers and coil dimensions for stamping, forming and industrial component manufacturing.

What tempers are available for 5052 aluminum strip?

Common temper options include 5052-O, H32 and H34. O temper is selected for applications requiring greater formability, while H32 and H34 are strain-hardened conditions with higher strength. The suitable temper depends on the required forming process and mechanical properties.

Can Haomei supply 5052 aluminum strip in custom widths?

Yes. Haomei can process wider 5052 aluminum coils into customer-specified strip widths, subject to the available slitting range. Required width and tolerance should be confirmed before production.

What thickness is available for 5052 aluminum strip?

Available thickness depends on the parent coil, material temper and processing capability. Customers can provide their required thickness and tolerance for confirmation before ordering.

Can Haomei control burr height on slit aluminum strip?

Slit-edge condition and burr height are important processing inspection items. Haomei evaluates the cutting-edge requirements against the agreed order specification. Customers can provide a required maximum burr height for confirmation.

What information is needed to request a quotation?

To prepare a quotation, please provide the alloy, temper, thickness, strip width, dimensional tolerances, order quantity and required coil ID/OD. Details about burr height, surface finish, packaging and intended processing application are also helpful.

Can 5052 aluminum strip be used for cable armoring?

5052 aluminum strip may be considered for selected cable-related applications, depending on the cable structure, material thickness and required mechanical properties.

Further reading

Users viewing this material also viewed the following

Recommended Content