1060 h12 aluminum sheet plate
1060-H12 aluminum alloy belongs to the 1000 series "commercially pure" wrought aluminum alloys, with an aluminum content of at least 99.6%. The "H12" temper designation indicates that the material has been strain-hardened to a quarter-hard condition through cold working, thereby enhancing its strength without significantly compromising ductility.
1060-H12 aluminum is an industrially pure, low-strength aluminum alloy in the H12 temper, primarily strengthened through cold working. As a member of the 1000 series (wrought aluminum), it is highly regarded for its excellent formability, corrosion resistance, and high electrical and thermal conductivity.
1060-H12 aluminum is a versatile and cost-effective material suitable for applications where conductivity, corrosion resistance, and formability are prioritized over mechanical strength. It is easy to manufacture and meets international standards, making it a mainstream material in industries ranging from construction to electronics.
1060-H12 aluminum is 1060 aluminum in the H12 temper, with a strength approximately one-quarter of that between annealed (O) and fully hard (H18) conditions.
- Alloy Type: 1060 aluminum
- Temper: H12
- Treatment: Strain hardening
- Comparison with Annealed State: The strength of H12 temper aluminum is significantly higher than that of the annealed state but much lower than that of the H18 state.
- Comparison with Fully Hardened State: The strength and hardness are lower than those of fully hardened aluminum alloys.
1060-H12 aluminum provides a good balance of strength and ductility, suitable for applications requiring moderate strength but not extreme hardness, such as medium-strength structural components and parts.
1060 H12 Aluminum Properties
| Property Category | Description |
| High Corrosion Resistance | 1060-H12 Aluminum exhibits high corrosion resistance due to its high aluminum content, which provides excellent natural protection against oxidation and atmospheric agents. This property makes it suitable for use in various environments, including humid, marine, and industrial atmospheres, where long-term durability without the need for additional coatings is essential. |
| Excellent Workability | 1060-H12 Aluminum offers outstanding formability, allowing it to be easily shaped using conventional methods such as bending, stamping, and deep drawing. Its moderate strength combined with excellent ductility makes it a preferred material in applications that require intricate shaping or precise dimensional forming, such as cookware manufacturing, architectural paneling, and electronic enclosures. |
| Good Electrical and Thermal Conductivity | 1060-H12 Aluminum provides excellent electrical and thermal conductivity, thanks to its high purity level. This makes it especially advantageous in applications requiring efficient current flow or heat dissipation, such as transformer windings, heat exchangers, and electronic heat sinks, where performance and reliability are critical. |
Specification of 1060 H12 Aluminum Sheet Plate
- Thickness: 0.2mm -6mm
- Width: 30 mm-2600 mm
- Length: as the customer required
- Temper: O /H12/H14/H16/H18/H26
- Standards: ASTM B209 (sheet/plate), B210 (drawn tubes), and ISO 6361.
- Availability: Offered in sheets, plates, and coils, with thicknesses up to 500 mm and widths to 2650 mm.
Various Forms of 1060-H12 Aluminum from Haomei
| Product | Image | Description |
| 1060-H12 Aluminum Sheets and Plates |
|
1060-H12 Aluminum Sheets and Plates are commonly used in construction and manufacturing industries due to their excellent workability, high corrosion resistance, and good electrical conductivity. These sheets and plates are ideal for roofing, wall cladding, signage, and other structural applications where strength is moderate but formability and conductivity are essential. |
| 1060-H12 Aluminum Tubes |
|
1060-H12 Aluminum Tubes are widely used in decorative applications because of their smooth surface finish, ease of forming, and bright appearance. They are ideal for handrails, curtain rods, furniture frames, and other visible components that require aesthetic appeal along with corrosion resistance. |
| 1060-H12 Aluminum Discs |
|
1060-H12 Aluminum Discs are typically used for cookware and signage owing to their excellent thermal conductivity, ease of deep drawing, and smooth surface finish. These discs are often stamped or spun into pans, lids, and plates, as well as cut into signs and panels for commercial displays. |
| 1060-H12 Aluminum Bars |
|
1060-H12 Aluminum Bars are solid aluminum rods suited for structural components and various machined parts. With high ductility and good corrosion resistance, these bars are commonly utilized in support frameworks, connectors, and precision-machined mechanical components. |
| 1060-H12 Aluminum Coils |
|
1060-H12 Aluminum Coils are often used for roofing and insulation applications due to their lightweight nature, flexibility, and high reflectivity. The coils can be easily formed into cladding, insulation layers, and protective covers for both residential and industrial buildings. |
1060-H12 Aluminum Processing
Strain Hardening: Increases the metal's strength through mechanical deformation, achieved by applying a certain amount of plastic deformation to 1060 aluminum, usually through processes like rolling or stretching.
- Excellent Formability: Suitable for processes such as stamping, drawing, and bending; widely used in the manufacturing of complex-shaped components.
- Weldability: Supports gas welding, atomic hydrogen welding, and resistance welding, but has relatively poor brazing performance.
- Surface Treatment: Can be anodized and processed to enhance corrosion resistance or decorative appearance.
Manufacturing and Processing
- Cold Working: Excellent cold forming properties; achieves H12 temper through strain hardening, with strength approximately 25% of H18 (full hard) condition.
- Annealing: Performed at 343°C (650°F) to restore ductility after cold working.
- Welding: Compatible with standard welding methods (e.g., TIG, MIG) using 1060 filler rod.
- Machinability: Generally poor in the soft state, but improves in harder tempers such as H14 or H18.
1060-H12 Aluminum Strength
- Relative to Annealed State (O): Strength is approximately one-quarter of that of the annealed state.
- Relative to Fully Hardened State (H18): Lower than the strength of the H18 state.
- Strength Range: Falls between the annealed state and fully hardened state.
Chemical Composition of 1060 Aluminum Sheet
| Elements | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Others | Al |
| Content (max) | 0.25 | 0.35 | 0.05 | 0.03 | 0.03 | – | 0.05 | 0.03 | 0.15 | Remain |
Mechanical Properties of 1060 Aluminum Sheet
| Alloy Temper | Specified | Tensile | Yield | Elongation(%) |
| Thickness(in.) | strength(ksi) | strength(ksi) | ||
| 1060-O(annealed) | 0.006-0.019 | 8.0-14.0 | 2.5 | Min15 |
| 0.020-0.050 | Min22 | |||
| 0.051-3.000 | Min25 | |||
| 1060-H12/1060-H22 | 0.017-0.050 | 11.0-16.0 | 9 | Min6 |
| 0.051-2.000 | Min12 | |||
| 1060-H14/1060-H24 | 0.006-0.019 | 12.0-17.0 | 10 | Min1 |
| 0.020-0.050 | Min5 | |||
| 0.051-1.000 | Min10 | |||
| 1060-H16/1060-H26 | 0.006-0.019 | 14.0-19.0 | 11 | Min1 |
| 0.020-0.050 | Min4 | |||
| 0.051-0.162 | Min5 | |||
| 1060-H18/1060-H28 | 0.006-0.019 | Min16.0 | Min12.0 | Min1 |
| 0.020-0.050 | Min3 | |||
| 0.051-0.128 | Min4 | |||
| 1060-H112 | 0.250-0.499 | Min11.0 | Min7.0 | Min10 |
| 0.500-1.000 | Min10.0 | Min5.0 | Min20 | |
| 1.001-3.000 | Min9.0 | Min4.0 | Min25 |
1060 H12 Aluminum Physical Properties
- Density: 2.7 g/cm³
- Melting Point: Approximately 649°C (1200°F)
- Thermal Conductivity: 234 W/m·K at 25°C
- Electrical Conductivity: Approximately 62% that of pure copper
1060 H12 Aluminum Applications
| Application Field | Description |
| Electrical Industry | 1060-H12 Aluminum is widely used in the electrical industry for manufacturing conductors, transformer windings, busbars, battery connectors, and printed circuit boards due to its excellent electrical conductivity. Its high purity ensures efficient current flow and minimal power loss, making it an ideal material for energy-efficient electrical components. |
| Chemical Equipment | 1060-H12 Aluminum is used in the chemical industry for fabricating storage tanks, pipelines, reflective surfaces (such as lighting fixtures), and other equipment that requires high corrosion resistance. Its ability to withstand chemical exposure without degrading makes it suitable for use in harsh or reactive environments. |
| Construction | 1060-H12 Aluminum is commonly applied in the construction sector for roofing, cladding, wall panels, and decorative architectural elements. Its lightweight nature, good weather resistance, and formability make it a practical choice for both structural and aesthetic purposes in modern buildings. |
| Food Industry | 1060-H12 Aluminum is utilized in the food industry for making cookware, kitchen utensils, and food processing equipment. Its non-toxic composition, easy-to-clean surface, and excellent thermal conductivity ensure safety, hygiene, and even heat distribution during cooking or processing. |
| Transportation | 1060-H12 Aluminum finds applications in transportation, particularly in the production of railway tank cars, automotive heat shields, and bus components. Its corrosion resistance and ability to be formed into complex shapes make it suitable for lightweight and durable transportation structures. |
1060 H12 Aluminum Compared with Other Alloys
- Compared with 6061-T6: 6061-T6 has higher strength (UTS 310 MPa), while 1060-H12 excels in electrical conductivity (62% IACS vs. 43% IACS) and formability.
- Compared with 1050: The composition is nearly identical, but 1060 has stricter impurity limits, improving consistency in electrical applications.
Other Properties
- Corrosion Resistance: The natural oxide film on the surface provides protection against atmospheric corrosion, suitable for both indoor and outdoor environments.
- Electrical/Thermal Conductivity: Its pure aluminum nature makes it an ideal material for heat dissipation and electrical applications.
- Cost-Effectiveness: Mature production processes and significantly lower cost compared to other aluminum alloys.
1060-H12 aluminum combines high purity with strain-hardened mechanical properties, making it a versatile material suitable for a wide range of industrial applications.
Haomei 1060 h12 aluminum sheet plate stock list
| Description | Thickness (inch) | Width (inch) | Length (inch) |
| 0.05" 1060 h12 aluminum sheet 48 × 96 | 0.05" | 48" | 96" |
| 0.05" 1060 h12 aluminum sheet 48 × 120 | 0.05" | 48" | 120" |
| 0.05" 1060 h12 aluminum sheet 36 × 72 | 0.05" | 36" | 72" |
| 0.05" 1060 h12 aluminum sheet 60 × 120 | 0.05" | 60" | 120" |
| 0.063" 1060 h12 aluminum sheet 48 × 96 | 0.063" | 48" | 96" |
| 0.063" 1060 h12 aluminum sheet 48 × 120 | 0.063" | 48" | 120" |
| 0.063" 1060 h12 aluminum sheet 36 × 72 | 0.063" | 36" | 72" |
| 0.063" 1060 h12 aluminum sheet 60 × 120 | 0.063" | 60" | 120" |
| 0.08" 1060 h12 aluminum sheet 48 × 96 | 0.08" | 48" | 96" |
| 0.08" 1060 h12 aluminum sheet 48 × 120 | 0.08" | 48" | 120" |
| 0.08" 1060 h12 aluminum sheet 36 × 72 | 0.08" | 36" | 72" |
| 0.08" 1060 h12 aluminum sheet 60 × 120 | 0.08" | 60" | 120" |
| 0.1" 1060 h12 aluminum sheet 48 × 96 | 0.1" | 48" | 96" |
| 0.1" 1060 h12 aluminum sheet 48 × 120 | 0.1" | 48" | 120" |
| 0.1" 1060 h12 aluminum sheet 36 × 72 | 0.1" | 36" | 72" |
| 0.1" 1060 h12 aluminum sheet 60 × 120 | 0.1" | 60" | 120" |
| 0.15" 1060 h12 aluminum sheet 48 × 96 | 0.15" | 48" | 96" |
| 0.15" 1060 h12 aluminum sheet 48 × 120 | 0.15" | 48" | 120" |
| 0.15" 1060 h12 aluminum sheet 36 × 72 | 0.15" | 36" | 72" |
| 0.15" 1060 h12 aluminum sheet 60 × 120 | 0.15" | 60" | 120" |
| 0.2" 1060 h12 aluminum sheet 48 × 96 | 0.2" | 48" | 96" |
| 0.2" 1060 h12 aluminum sheet 48 × 120 | 0.2" | 48" | 120" |
| 0.2" 1060 h12 aluminum sheet 36 × 72 | 0.2" | 36" | 72" |
| 0.2" 1060 h12 aluminum sheet 60 × 120 | 0.2" | 60" | 120" |
| 0.3" 1060 h12 aluminum sheet 48 × 96 | 0.3" | 48" | 96" |
| 0.3" 1060 h12 aluminum sheet 48 × 120 | 0.3" | 48" | 120" |
| 0.3" 1060 h12 aluminum sheet 36 × 72 | 0.3" | 36" | 72" |
| 0.3" 1060 h12 aluminum plate 60 × 120 | 0.3" | 60" | 120" |
| 0.4" 1060 h12 aluminum plate 48 × 96 | 0.4" | 48" | 96" |
| 0.4" 1060 h12 aluminum plate 48 × 120 | 0.4" | 48" | 120" |
| 0.4" 1060 h12 aluminum plate 36 × 72 | 0.4" | 36" | 72" |
| 0.4" 1060 h12 aluminum plate 60 × 120 | 0.4" | 60" | 120" |
| 0.5" 1060 h12 aluminum plate 48 × 96 | 0.5" | 48" | 96" |
| 0.5" 1060 h12 aluminum plate 48 × 120 | 0.5" | 48" | 120" |
| 0.5" 1060 h12 aluminum plate 36 × 72 | 0.5" | 36" | 72" |
| 0.5" 1060 h12 aluminum plate 60 × 120 | 0.5" | 60" | 120" |
| 0.63" 1060 h12 aluminum plate 48 × 96 | 0.63" | 48" | 96" |
| 0.63" 1060 h12 aluminum plate 48 × 120 | 0.63" | 48" | 120" |
| 0.63" 1060 h12 aluminum plate 36 × 72 | 0.63" | 36" | 72" |
| 0.63" 1060 h12 aluminum plate 60 × 120 | 0.63" | 60" | 120" |
Questions about 1060 h12 aluminum sheet plate
What is H12 in Aluminium?
H12 in Aluminum: H12 refers to an aluminum temper where the metal is partially work-hardened to provide moderate strength while retaining good ductility.
What is 1060 aluminum grade?
1060 Aluminum Grade: 1060 aluminum is a commercially pure aluminum with excellent corrosion resistance and high thermal and electrical conductivity.
What is the difference between 1060 and 6061 aluminum?
Difference Between 1060 and 6061 Aluminum: 1060 aluminum is a pure aluminum with high corrosion resistance, while 6061 is a heat-treatable alloy with better strength and hardness due to its magnesium and silicon content.
Is 1060 alloy strong?
1060 aluminum is not particularly strong compared to other alloys; it is more valued for its excellent corrosion resistance and workability.
Products you may be interested in
- 1060 Aluminum Plate Sheet
- 1060 h24 aluminum sheet plate
- 1060-O Aluminum
- 1060-H14 Aluminum
- 1060-H16 Aluminum
- 1060-H18 Aluminum
- 1060 H22 Aluminum
- 1060 H26 Aluminum
- 1060 H28 Aluminum
Further reading
Users viewing this material also viewed the following
- 1060 O Aluminium Strips for Transformers Winding
- 1060 Aluminum Mirror Sheet Coil
- 1060 Embossed Aluminum Sheet
- Hemispherical embossed aluminum sheet coil 1050 1060 1100 for automotive heat shield
- 1060 Aluminum Plate for Curtain Wall Panel
- 1060 Aluminum Plate for Stamping Parts
- 1060 Aluminum Plate for Automotive Parts
- 1060 H24 Stamping Aluminum Plate for Aluminum Bottle Cap
- 5 Bar 1060 Aluminum Checker Plate
- 1060 Decorative Aluminum Plate
- 1060 Aluminum Tread Plate for Carriage Floor
- 1060 Hot-rolled Aluminum Plate for Lamps
- 1060 Aluminum Circle Disc for Kitchenware
- 1060 O Aluminum Coil Strip for Mask Nose Clip
- 1060 Aluminum Strip for Vial Seals
- 1060 Embossed Aluminum Sheet for Automotive Heat Shields
- 1060 Aluminum Plate Strips for Capacitor Shells – High Purity & Durable
- 1060 Aluminum Plate for Outdoor Billboard
- 1060 Aluminum Plate for Printed Circuit Board (PCB) Substrates
- 1060 Aluminum Sheet Coil for Pipeline Insulation
- 1060 Aluminum Plate for Aluminum-based Copper-clad Plate
Recommended Content
- Key Differences Between 1050 and 1060 Aluminum What You Need to Know
- 1060-O Aluminum vs. 1100-H14 Aluminum: A Comparative Analysis
- 1060 Aluminum vs. 1100-H14 Aluminum: Key Differences
- Performance Comparison: 1060-H16 Aluminum vs. 1060-H24 Aluminum
- Differences Between 1060-H22 Aluminum and 1070-H22 Aluminum
- Comparison of 1060-H28 Aluminum vs. 1100-H28 Aluminum