5086 H32 Aluminum Sheet & Plate
Haomei Aluminum supplies 5086-H32 aluminum sheet and plate for structural fabrication, transportation equipment, marine components and industrial applications. This non-heat-treatable aluminum-magnesium alloy combines medium strength, good corrosion resistance and reliable weldability.
We offer mill-finish material in a range of thicknesses and dimensions, with cut-to-size services available according to project requirements.
- Alloy: 5086
- Temper: H32
- Product Form: Sheet & Plate
- Standard: ASTM B209, as specified
Mill-finish 5086-H32 plate and sheet in standard and custom dimensions, available for cutting, bending, punching, welding and other fabrication requirements.
What is 5086 H32 Aluminum?
5086-H32 aluminum is a non-heat-treatable aluminum-magnesium alloy in the 5xxx series. Its strength is developed through controlled strain hardening and stabilization rather than precipitation hardening.
The designation 5086 identifies the alloy, while H32 describes its temper. The H indicates a strain-hardened condition, the 3 indicates stabilization after strain hardening, and the final 2 represents an approximately quarter-hard condition.
Compared with the annealed O temper, 5086-H32 offers higher strength while retaining useful cold-forming characteristics. This makes it suitable for sheet metal fabrication, welded structural components and corrosion-resistant industrial equipment.
5086-H32 is not equivalent to 5086-H116 or H321. The latter tempers are specifically relevant to marine products subject to additional corrosion-resistance requirements.
5086 H32 Aluminum Plate & Sheet Specifications
Haomei Aluminum supplies 5086 H32 aluminum sheets and plates in standard sizes and custom-cut dimensions. Thickness, width and length can be specified according to your fabrication drawings or project requirements.
| Item | Specifications |
| Alloy | 5086 Aluminum Alloy (AA 5086) |
| Aluminum Series | 5000 Series – Aluminum-Magnesium (Al-Mg) |
| Temper | H32 |
| Product Form | Aluminum Sheet, Aluminum Plate and Cut-to-Size Plate |
| Sheet Thickness | 0.032"–0.190" (0.81–4.83 mm) |
| Plate Thickness | 0.249"–0.625" (6.32–15.88 mm) |
| Other Thicknesses | Additional gauges available for specific project requirements. |
| Standard Widths | 12", 24", 36" and 48" (305, 610, 914 and 1, 219 mm) |
| Standard Lengths | 12", 24", 36", 48", 96", 120" and 144" (305–3, 658 mm, depending on size) |
| Custom Dimensions | Custom width and length available for cut-to-size orders. |
| Surface Finish | Mill Finish |
| Applicable Standard | ASTM B209, as specified in the purchase order. |
| Material Identification | Alloy, temper and production lot identification. |
| Quality Documentation | Material Test Certificate (MTC), available according to order requirements. |
| Additional Processing | Cutting, CNC machining, drilling and other fabrication services according to drawings and processing requirements. |
5086 H32 Aluminum Mechanical Properties and Chemical Composition
5086 H32 Aluminum Mechanical Properties
| Mechanical Property | Typical Reference Value |
| Tensile Strength | 290 MPa (42 ksi) |
| Yield Strength (0.2% Offset) | 207 MPa (30 ksi) |
| Elongation | 12% |
The mechanical properties of 5086-H32 aluminum depend on the product thickness, manufacturing condition and applicable material specification. As a strain-hardened aluminum alloy, H32 provides higher strength than the annealed O condition while maintaining useful elongation for conventional fabrication.
Note: These are typical reference values for 5086-H32, not guaranteed minimum acceptance values for every thickness. Final mechanical requirements must be confirmed against the applicable material standard and the supplied material test certificate.
5086 Aluminum Chemical Composition
| Element | Composition |
| Silicon (Si) | ≤ 0.40% |
| Iron (Fe) | ≤ 0.50% |
| Copper (Cu) | ≤ 0.10% |
| Manganese (Mn) | 0.20 - 0.70% |
| Magnesium (Mg) | 3.50 - 4.50% |
| Chromium (Cr) | 0.05 - 0.25% |
| Zinc (Zn) | ≤ 0.25% |
| Titanium (Ti) | ≤ 0.15% |
| Others, each | ≤ 0.05% |
| Others, total | ≤ 0.15% |
| Aluminum | Balance |
5086 H32 Aluminum Thickness Tolerance
The thickness tolerance of 5086-H32 aluminum sheet and plate depends on the nominal thickness, product width, product form and the governing dimensional specification.
At Haomei Aluminum, dimensional requirements are reviewed before production or cutting. Customers requiring tighter dimensional control can provide their nominal thickness and allowable deviation when requesting a quotation.
Why Choose 5086-H32 Aluminum?
Marine Corrosion Resistance
5086 belongs to the Al-Mg 5xxx family and is widely used in marine service because of its strong resistance to corrosion in seawater and salt-laden environments. The actual service performance depends on design, exposure, fabrication, surface condition and the applicable marine specification.
Medium Strength
H32 provides a moderate level of strain hardening. Compared with 5052-H32, 5086-H32 is generally used where additional structural strength is desirable. 5083 may provide higher mechanical strength in comparable product and temper conditions.
Weldability
5086 is a commonly welded non-heat-treatable aluminum alloy. MIG and TIG welding are widely used, although filler metal, joint design, welding procedure and the expected strength of the welded area should be evaluated for the specific application.
Balance of Formability and Strength
H32 sits between soft annealed material and more heavily strain-hardened tempers. That makes it useful for fabricated components where some forming is required but the design also needs a more stable medium-strength condition.
Low-Temperature Toughness
Aluminum-magnesium alloys retain useful toughness at low temperatures and are therefore considered in selected refrigerated and cryogenic-related applications. Specific low-temperature qualification should always be confirmed against the project standard.
Non-Magnetic Material
5086 aluminum is non-ferromagnetic and is suitable for applications where magnetic response must remain low. The exact magnetic behavior of a finished assembly will still depend on all materials used in the system.
Which 5086 Temper Should You Choose?
5086-O
Consider when maximum formability and a softer material condition are more important than the higher strength associated with strain-hardened tempers.
5086-H32
A practical medium-strength condition for general structural, transportation and welded fabrication applications where a balance of strength and workability is required.
5086-H116
Commonly considered where marine-service corrosion requirements and the applicable marine material specification are important. It should be selected according to the governing project or classification requirement.
5086-H321
Another stabilized temper encountered in marine and structural applications. The precise material requirement should be matched to the purchasing specification rather than assuming H321 and H32 are interchangeable.
5086 H32 Aluminum Fabrication & Machining
5086 H32 aluminum sheet and plate can be cut, bent, punched, welded and machined for marine structures, industrial equipment and fabricated components. Its strength and corrosion resistance make it suitable for applications involving both forming and machining. The processing method depends on material thickness, component design and finished part requirements.
5086 H32 Aluminum Cutting
5086 H32 aluminum plate can be cut using CNC sawing, waterjet, plasma or other suitable industrial cutting methods. The choice depends on plate thickness, dimensional tolerance and required edge quality. Haomei Aluminum supplies cut-to-size material according to customer drawings and specified dimensions.
5086 H32 Aluminum Bending
5086 H32 aluminum sheet is suitable for cold bending into panels, brackets, covers and structural components. The minimum inside radius depends on sheet thickness, bending direction, tooling and forming angle. For tight bends or complex shapes, we recommend checking the bend radius against the actual material specifications before production.
5086 H32 Aluminum Punching & Stamping
5086 H32 aluminum sheet can be punched and used for moderate stamping operations, including the production of mounting plates, brackets, equipment covers and structural parts. Punch clearance, tooling design and material thickness affect hole accuracy and edge quality. For complex shapes or high-volume production, trial forming helps confirm the tooling setup.
5086 H32 Aluminum Welding
5086 H32 aluminum has good weldability and is commonly joined using MIG (GMAW) and TIG (GTAW) welding. ER5356 and ER5183 filler metals may be considered depending on the joint design, service environment and required weld properties.
5086 H32 Aluminum Sheet & Plate Applications
5086 H32 aluminum sheet and plate are used in marine equipment, transportation, industrial tanks and welded structures. Material selection depends on the working environment, component design, strength requirements and fabrication method.
| Application | Typical Components | Material Selection Considerations |
| Marine Equipment | Equipment panels, brackets and secondary structures | Seawater exposure and specified corrosion requirements |
| Transportation Equipment | Tank body components, vehicle panels and structural parts | Strength, weight and welding requirements |
| Industrial Tanks | Tank panels, covers and fabricated components | Chemical exposure and applicable design codes |
| Welded Structures | Frames, supports and mounting plates | Joint strength, welding procedure and structural requirements |
| Industrial Equipment | Housings, protective panels and machine components | Corrosion resistance, plate thickness and dimensional requirements |
5086-H32 aluminum is selected for fabricated components that require a combination of moderate strength, corrosion resistance and good weldability.
In transportation equipment, it can be used for selected tank body components, panels and welded structures. In marine equipment, it is suitable for certain fabricated parts where the specified service conditions do not require a different marine-certified temper.
5086 H32 Aluminium Sheet Equivalent Grades
| System | Reference Designation |
| European | EN AW-5086 |
| UNS | A95086 |
| ISO | AlMg4 |
| DIN / German Reference | AlMg4Mn |
| Old European / Trade References | AG4MC / 3.3545 references may appear in older material records |
Haomei Quality Control for 5086-H32 Aluminum
At Haomei Aluminum, we check 5086-H32 aluminum sheet and plate against the agreed alloy, temper, dimensions and product requirements. Our inspection process covers the following areas before delivery:
- Material Identification: Verify the 5086 alloy and H32 temper against order specifications and material records.
- Dimensional Inspection: Check thickness, width and length against agreed tolerances, with additional flatness checks when specified.
- Surface Quality: Inspect for visible scratches, dents, oxidation and other surface defects that may affect fabrication or finishing.
- Mechanical Properties: Review tensile strength, yield strength and elongation test results against the applicable material specification.
- Edge Quality: Check cut edges, burrs and finished dimensions for cut-to-size aluminum plate and sheet.
- Material Documentation: Provide material test certificates (MTC) and agreed inspection records according to order requirements.
5086 H32 Aluminum Plate Packaging for Export
Haomei Aluminum uses suitable protective packaging for 5086-H32 aluminum sheets and plates to help prevent surface damage and moisture exposure during storage and transportation.
- Protective film on finished surfaces where applicable.
- Moisture-resistant paper and outer wrapping.
- Wooden pallet or suitable wooden support arrangements.
- Edge protection for long-distance transportation.
- Additional wrapping or reinforcement for export shipments.
- Packing suitable for loading and unloading requirements.
5086 H32 vs 5083 H32 vs 5052 H32
| Property | 5052-H32 | 5086-H32 | 5083-H32 |
| Strength | Medium | Medium to relatively high | Generally higher |
| Marine Corrosion Resistance | Very good | Excellent | Excellent |
| Formability | Very good | Good in the H32 condition | Moderate to good, depending on temper |
| Weldability | Very good | Excellent | Excellent |
| Typical Uses | General fabrication, panels, tanks and formed parts | Marine structures, transportation and welded structures | Marine structures, heavy-duty fabrication and structural plate |
| Selection Logic | Favor formability and general corrosion resistance | Favor the balance of corrosion resistance, weldability and strength | Consider when higher structural strength is the priority |
When Should You Choose 5086-H32?
Choose 5086-H32 when your project requires a strain-hardened aluminum alloy for general fabrication, transportation equipment, welded components or selected marine equipment.
When Should You Choose 5086-H116?
Consider 5086-H116 for marine applications requiring compliance with ASTM B928/B928M and the specified resistance to intergranular and exfoliation corrosion.
When Should You Choose 5086-H321?
Choose H321 when the drawing, purchasing specification or applicable marine standard specifically calls for that temper. It should not be substituted for H32 or H116 without checking the applicable mechanical and corrosion requirements.
Custom 5086 H32 Aluminum Sheet and Plate
- Alloy: 5086
- Temper: H32
- Thickness
- Width
- Length
- Quantity
- Product form: sheet or plate
- Applicable standard
- Surface finish
- Protective film requirement
- Dimensional tolerance
- Certification requirement
- UT requirement, if applicable
- Third-party inspection, if required
Need 5086-H32 Aluminum Plate or Sheet?
Send the alloy, temper, thickness, width, length, quantity, standard and certification requirements. Haomei can review the specification and confirm the appropriate supply route.
Request a QuoteFAQ – 5086 H32 Aluminum
Is 5086-H32 a marine-grade aluminum alloy?
5086 is widely used as a marine aluminum alloy because of its corrosion resistance and weldability. For projects with specific marine classification or exfoliation-corrosion requirements, the applicable temper and product specification should be confirmed before ordering.
What is the difference between 5086-H32 and 5086-H116?
Both are strain-hardened 5086 tempers, but H116 is commonly selected where marine-service corrosion performance and the applicable marine material requirements are more stringent. H32 is often used for general structural fabrication when those specific marine requirements are not stipulated.
Is 5086-H32 weldable?
Yes. 5086 is generally regarded as a weldable non-heat-treatable aluminum alloy and is commonly welded by MIG and TIG processes. Filler metal, welding procedure and post-weld properties should be evaluated against the project specification.
Is 5086-H32 stronger than 5052-H32?
5086-H32 generally provides higher strength than 5052-H32 while retaining strong corrosion resistance and weldability. Exact properties depend on thickness, product form and the governing material specification.
What is the difference between 5086-H32 and 6061-T6?
5086-H32 is a non-heat-treatable Al-Mg alloy commonly selected for corrosion resistance and welded marine structures. 6061-T6 is a heat-treatable alloy often chosen for higher base-metal strength and machining applications. The heat-affected zone of welded 6061 does not retain the full T6 base-metal strength.
Can 5086-H32 aluminum plate be cut to size?
Yes. 5086-H32 sheet and plate can be supplied in cut-to-size dimensions subject to equipment, production limits, quantity and the customer's dimensional requirements.
What standard should be specified when buying 5086-H32 plate?
The applicable standard depends on the product form and project. ASTM, EN, customer or marine-specific specifications may impose different chemical, mechanical, dimensional and certification requirements. The purchase order should identify the governing standard rather than relying on the alloy and temper alone.
Is 5086-H32 suitable for automotive applications?
5086 can be considered for selected transportation and vehicle components where corrosion resistance and weldability are important. For high-volume automotive body applications, material selection is normally driven by the OEM's own alloy, forming and joining specifications, so 5086-H32 should not be presented as a universal automotive body-sheet alloy.
Products you may be interested in
- 5086 Aluminum Sheet Plate
- 5086 h116 aluminum plate sheet
- 5086 h111 aluminum plate sheet
- 5086 O aluminum plate sheet
Users viewing this material also viewed the following
Recommended Content
