5182 Aluminum Coil
5182 aluminum coil is an aluminum-magnesium alloy used for beverage can ends, opening tabs and automotive stampings. It combines relatively high strength with corrosion resistance and useful forming characteristics, making it a practical choice for parts that must withstand both forming operations and service loads.
We offer coil-based material for subsequent processing, with specifications discussed around alloy, temper, thickness, width, coil inner diameter and surface condition. For can-end or tab stock, we review the intended conversion process alongside the material specification.
- Temper
- O / H32 / H34 / H38; H48 for can-end stock
- Supply Forms
- Aluminum coils / slit strips
- Main Applications
- Beverage can ends / easy-open ends / tab stock / other formed components
What Is 5182 Aluminum Coil?
5182 aluminum is a non-heat-treatable 5xxx-series Al-Mg-Mn alloy known for high strength, good formability and useful corrosion resistance in many service environments. Magnesium provides much of its strength, while manganese is part of the controlled alloy composition. Its mechanical properties depend on the temper and the amount of cold work applied during processing.
- For beverage packaging, 5182 is widely associated with high-strength can-end and tab stock. The coil itself is the raw material, not a finished can lid or pull tab.
- The alloy is also used in selected automotive sheet and formed components. Its suitability depends on the required strength, degree of deformation, surface condition and production route.
For beverage can body material, compare our 3104 aluminum coil and strip. The two alloys serve different roles in typical can-making applications and are not interchangeable solely on the basis of nominal thickness.
5182 Aluminum Coil Specifications
Haomei Aluminum supplies 5182 aluminum coil in selected thicknesses, widths, tempers and surface conditions for application-specific processing. Slit widths, thickness tolerances and coating requirements can be reviewed against the intended use and confirmed order specifications.
| Alloy Designation | AA 5182 / EN AW-5182; UNS A95182 |
| Material Family | 5xxx-series aluminum-magnesium alloy containing manganese |
| Available Tempers | O, H32, H34 and H38 for applicable sheet and coil requirements. H48 is used for certain can-end stock specifications. The suitable temper depends on the application, forming process and applicable product specification. |
| Thickness | 0.20–0.50 mm |
| Parent Coil Width | 300–1600 mm |
| Slit Strip Width | Example widths include 300 mm, 350 mm, 405 mm and 505 mm. Other slit widths can be reviewed according to the required dimensions and order specifications. |
| Thickness Tolerance | ±0.005 mm or ±0.008 mm, subject to the specified thickness, coil width, applicable standard and confirmed order requirements. |
| Surface Finish and Lubrication | Mill finish, DOS-lubricated surface, or single-side or double-side epoxy coating, subject to application requirements and finish availability. |
| Minimum Order Quantity (MOQ) | 2 tons, subject to alloy, temper, dimensions, surface requirements and production arrangements. |
| Packaging | Export packing can be arranged with moisture-resistant wrapping, edge protection and secured coil supports. Coil-eye orientation and other packing details can be confirmed before shipment. |
Mechanical Properties of 5182 Aluminum
| Alloy-Temper | Tensile Strength (ksi) | Yield Strength (ksi) | Elongation (%) |
| 5182-O | 40 | 21 | 21 |
| 5182-H34 | 48 | 37 | 11 |
| 5182-H38 | 54 | 47 | 6 |
5182 Aluminum Alloy Chemical Composition
| Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Others-Each | Others Total | Al | |
| 5182 | 0.20 | 0.35 | 0.15 | 0.20-0.50 | 4.0-5.0 | 0.10 | 0.25 | 0.10 | 0.05 | 0.15 | Remainder |
Typical Applications of 5182 Aluminum Coil
Beverage Can Ends and Easy-Open Tabs
5182 aluminum is widely used for beverage can ends and easy-open ends, where material strength and consistent forming performance are important to the finished component. The alloy temper, thickness and mechanical properties must match the end design, scoring requirements and stamping process.
Automotive Body Panels and Reinforcement Parts
Automotive applications include selected inner body panels, reinforcement members, brackets and stamped components. The choice of 5182 depends on the part geometry, required strength, forming conditions and surface appearance specified for the finished component.
Brackets, Supports and Formed Components
5182 can also be specified for brackets, supports and other formed parts that benefit from its strength and corrosion resistance. We assess the required alloy, temper and thickness against the component drawing and manufacturing conditions to help establish a suitable material specification.
5182 is primarily associated with beverage can ends and easy-open tabs, rather than conventional drawn-and-ironed (D&I) beverage can bodies. Alloys such as 3004 and 3104 are more commonly used for can bodies, while 5182 is a well-established choice for can-end applications.
The best alloy depends on the required strength, formability and service conditions. Compare our 5052 aluminum coil range for an alternative alloy, or visit our 5182 aluminum plate and sheet page to explore the plate and sheet product form.
Custom Slitting for 5182 Aluminum Coil
Haomei Aluminum supplies 5182 aluminum slit strip processed from coil to customer-specified widths and coil dimensions.
- Custom slit widths and agreed width tolerances
- Specified thickness, temper and dimensional inspection points
- Coil inner diameter, outside diameter and target coil weight
- Slit-edge burr, camber and edge-damage limits
- Mill finish or agreed surface treatment and coating requirements
- Coil identification, protective packaging and export handling
Send Haomei Aluminum your required thickness, temper, slit width, coil weight and application details for a specification review and supply quotation.
Haomei Quality Control for 5182 Aluminum Coil
Alloy and Chemical Composition
We verify the 5182 alloy designation against the applicable material specification and review the chemical composition records for the production batch.
Thickness and Width
We measure coil thickness and width at defined inspection points and compare the results with the tolerances recorded in the purchase specification.
Mechanical Properties
We check tensile strength, yield strength and elongation against the applicable temper and agreed test requirements. We keep the reported values tied to the specified material condition.
Surface Condition
We inspect the material surface for visible scratches, roll marks, dents, oil stains, oxidation and other defects that may affect subsequent forming or surface finishing.
Slit-Edge Quality
For slit coil, we examine edge condition and check the agreed requirements for burrs, camber, edge damage and finished-width consistency.
Coil Dimensions and Identification
We verify coil inner diameter, outside diameter, weight, winding condition and identification marks against the order and packing records.
Packaging and Shipment Protection
We secure the coils and use suitable moisture protection, edge protection and outer packing to reduce the risk of damage during storage, handling and export transportation.
Inspection Records
We prepare the agreed material and inspection documentation so that the alloy designation, dimensions and applicable test results can be checked against the purchase order.
5182 Aluminum Coil Packaging
- Moisture protection: Select suitable wrapping and moisture barriers for the expected transport and storage conditions.
- Surface and edge protection: Protect coil surfaces and edges against abrasion, dents and handling damage.
- Coil orientation and support: Confirm the coil's packing orientation, support arrangement and securing method.
- Package weight and handling: Match the packing arrangement to coil weight, lifting equipment and unloading conditions.
- Shipping marks and documents: Follow the agreed requirements for package labels, identification marks and shipping documentation.
How to Order 5182 Aluminum Coil
- Application: The intended use and any forming or processing requirements.
- Material: 5182 alloy and required temper, such as H32 or H34, where applicable.
- Dimensions: Thickness, coil width, inner diameter and target coil weight.
- Surface Requirement: Mill finish or other specified surface and coating requirements.
- Order Quantity: Required tonnage and any expected repeat-order volume.
- Destination Port: Port of discharge and destination country for shipment planning.
Request a Quotation for 5182 Aluminum Coil
Send your specifications to Haomei Aluminum for a supply review. We will check the requested dimensions, temper, surface requirements and quantity before confirming the applicable production and delivery options.
Contact Haomei Aluminum5182 vs. 3104 vs. 5052 Aluminum Coil
The right aluminum coil depends on the part being made and the forming process it must go through. 5182, 3104 and 5052 serve different purposes, particularly when strength, drawing performance and corrosion resistance are key considerations.
5182 Aluminum Coil for Can Ends
5182 aluminum coil is commonly selected for beverage can ends, easy-open ends and tab stock, where strength and reliable component performance are important. The specified temper and material condition also affect forming behavior, so the coil should be matched to the requirements of the end or tab production process.
3104 Aluminum Coil for Can Body
3104 aluminum coil is widely used for beverage can body stock. Its suitability depends on drawability, wall-ironing performance and consistency throughout forming. Alloy, temper and thickness should be specified according to the can-body production process rather than selected by alloy designation alone.
5052 Aluminum Coil for Fabricated Components
5052 aluminum coil is a practical option for fabricated sheet components, transportation parts and applications requiring good corrosion resistance. The appropriate temper and thickness depend on the balance of strength, formability and service conditions required by the finished component.
When comparing these alloys, start with the component's function and manufacturing process. Haomei Aluminum can review the required alloy, temper, thickness, coil width and applicable tolerances to help determine a suitable material specification for your production requirements.
FAQ – 5182 Aluminum Coil
What is 5182 aluminum coil mainly used for?
5182 aluminum coil is widely used for beverage can-end, easy-open end and tab stock. It is also used in selected automotive panels, stamped components and industrial applications where its strength and forming characteristics meet the requirements.
Is 5182 aluminum coil suitable for beverage can ends?
Yes. 5182 is a common alloy for high-strength beverage can-end stock. Temper, thickness, mechanical properties, surface treatment and forming performance are evaluated together to meet the requirements of the specified can-end design.
What is the difference between 5182-H48 and 5182-O?
O temper is annealed and generally offers greater ductility than harder strain-hardened conditions. H48 is commonly associated with can-end stock and application-specific strength requirements. Because the two tempers have different mechanical properties, they are not interchangeable without technical review.
Can Haomei supply slit 5182 aluminum coil?
Haomei can review slit-strip requirements against production capabilities. When requesting a quotation, provide the parent coil dimensions, finished strip widths, width tolerances, burr limits, coil inner diameter and target coil weight.
Is 5182 aluminum suitable for deep drawing?
Annealed 5182 aluminum can be suitable for demanding drawing operations, depending on the part geometry, draw ratio, tooling, lubrication and material forming behavior. The alloy, temper and dimensions should be evaluated against the requirements of the intended forming process.
Can 5182 aluminum coil be strengthened by heat treatment?
No. 5182 is a non-heat-treatable aluminum alloy. Its strength is increased mainly through cold working, and its mechanical properties depend on the selected temper. Annealing and subsequent processing affect the final mechanical condition.
Which surface finishes are available for 5182 aluminum coil?
Mill finish is a common supply option for 5182 aluminum coil. Conversion treatments and coating options can be reviewed against the confirmed product and processing specifications. Specify the coating type, coated side and applicable acceptance requirements when requesting a quotation.
What information helps Haomei quote 5182 aluminum coil?
Provide the alloy and temper, thickness, width, order quantity, coil inner diameter, surface condition, dimensional tolerances and destination. For can-end or tab applications, also include the intended manufacturing process and applicable material specifications so Haomei can review the requirements.
Further reading
Users viewing this material also viewed the following
Recommended Content