".125" aluminum diamond plate" refers to an aluminum diamond tread plate with a thickness of 0.125 inches (approximately 3.175 mm), commonly used as an anti-slip structural material in industrial, construction, and transportation applications.
125 inch aluminum diamond plate, commonly referred to as 1/8 inch aluminum diamond plate, is a versatile material characterized by its unique diamond pattern surface.
0.125" aluminum diamond tread plate Specifications
| Parameter | Value / Meaning | Additional Notes |
| Thickness | 0.125 inches (in) | Converted to metric units: 1 inch = 25.4 millimeters (mm), therefore 0.125 in = 3.175 mm, which is considered a medium-thin aluminum diamond plate. |
| Material | Aluminum Alloy | Not pure aluminum; performance depends on the specific alloy grade (common grades listed below in "Selection Guidelines"). |
| Pattern | Diamond Pattern (also called "tread plate" or "checker plate") | Raised diamond patterns on the surface increase friction for anti-slip purposes while enhancing visual texture and three-dimensional appearance. |
Material of 0.125" Aluminum Diamond Tread Plate
Dimensions of 0.125" Aluminum Diamond Tread Plate
- 1' x 1' (12 x 12) tread aluminum plate
- 1' x 2' (12 x 24) tread aluminum plate
- 1' x 4' (12 x 48) tread aluminum plate
- 1' x 10' (12 x 120) tread aluminum plate
- 1.5' x 10' (18 x 120) tread aluminum plate
- 2' x 2' (24 x 24) tread aluminum plate
- 2' x 4' (24 x 48) tread aluminum plate
- 2' x 5' (24 x 60) tread aluminum plate
- 2' x 6' (24 x 72) tread aluminum plate
- 2' x 8' (24 x 96) tread aluminum plate
- 2' x 10' (24 x 120) tread aluminum plate
- 3' x 3' (36 x 36) tread aluminum plate
- 3' x 4' (36 x 48) tread aluminum plate
- 3' x 10' (36 x 120) tread aluminum plate
- 4' x 4' (48 x 48) tread aluminum plate
- 4' x 8' (48 x 96) tread aluminum plate
- 4' x 10' (48 x 120) tread aluminum plate
- 5' x 8' (60 x 96) tread aluminum plate
Finish Options for 0.125" Aluminum Diamond Tread Plate
-
-
-
-
-
Red aluminum diamond tread plate
-
Grey aluminum diamond tread plate
Pattern Options for Haomei Aluminum Diamond Tread Plate
Other Popular Thickness Options for Haomei Aluminum Checker Plates
- .063"(1/16") tread aluminum plate
- .100" tread aluminum plate
- .125"(1/8") tread aluminum plate
- .188"(3/16") tread aluminum plate
- .250"(1/4") tread aluminum plate
- .375"(3/8") tread aluminum plate
- .500"(1/2") tread aluminum plate
0.125" Aluminum Diamond Tread Plate Features (Advantages of Aluminum Diamond Plate)
Excellent Anti-Slip Performance
The raised diamond pattern on the surface significantly increases friction, effectively reducing the risk of slipping even in wet or oily environments (e.g., workshop floors, vehicle floors), which is its core functional value.
Lightweight + Strength Balance
Aluminum has a density of only about 1/3 of steel. A 0.125 in thick plate is lightweight (approximately 8.5 kg/㎡, depending on the alloy), making it easy to handle, cut, and install. At the same time, alloy strengthening (e.g., 3003, 5052) can meet medium-strength requirements (e.g., load-bearing platforms, steps) without the "heavy yet brittle" issue.
Good Corrosion Resistance
Aluminum naturally forms a dense oxide layer (Al₂O₃) on its surface, protecting against air, water, and weak acids or alkalis. For enhanced durability (e.g., outdoor or coastal environments), surface treatments such as anodizing or coating can further improve protection, offering a lifespan far superior to ordinary carbon steel diamond plates.
Easy to Process + Aesthetic
Can be processed into any size/shape through conventional methods such as shearing, bending, welding, and drilling (e.g., customized steps or equipment housings). The diamond pattern provides both industrial texture and decorative appeal; natural silver or colored finishes can be used for indoor or outdoor decoration (e.g., garage floors, wall trims).
0.125" Aluminum Diamond Tread Plate Applications
- Industrial: workshop operation platforms, equipment maintenance steps, conveyor belt baseplates, forklift/truck cargo floor protection (prevent cargo slipping + protect vehicle floor).
- Transportation: bus/subway steps, RV/camper floors (lightweight + anti-slip), partial non-slip surfaces on ship decks (resistant to seawater corrosion).
- Construction & Residential: garage flooring (alternative to tiles, anti-slip and wear-resistant), stair step anti-slip strips, outdoor terraces/balconies, commercial spaces (e.g., auto repair shops, warehouses) wall/floor decoration.
- Equipment Manufacturing: generator/air compressor housings, toolbox/cabinet panels, medical equipment bases (lightweight + easy to clean).
Aluminum Diamond Tread Plate Selection Guidelines
Pay attention to alloy grade and surface treatment
Performance varies significantly among different aluminum alloys. Selection should consider the specific application. Commonly used alloys for 0.125 in thickness are compared below:
| Alloy Grade | Key Performance | Suitable Applications |
| 1050/1060 (Pure Aluminum) | High purity (over 99.5%), good plasticity, easy to process, but low strength | Suitable for decorative or low-strength needs (e.g., wall decoration, lightweight equipment housings), not suitable for load-bearing applications |
| 3003 (Aluminum-Manganese Alloy) | Strength about 20% higher than pure aluminum, excellent corrosion resistance, good weldability | Most versatile grade, suitable for most applications (e.g., vehicle floors, steps, platforms), cost-effective |
| 5052 (Aluminum-Magnesium Alloy) | Higher strength (about 30% higher than 3003), superior corrosion resistance (especially seawater), good toughness | Outdoor, coastal, high load applications (e.g., ship steps, outdoor platforms), but slightly more expensive |
| 6061 (Aluminum-Magnesium-Silicon Alloy) | Can be strengthened through heat treatment, strength close to mild steel, moderate corrosion resistance | Special high-strength scenarios (e.g., heavy equipment protective plates, mechanical structural parts), less commonly used at 0.125 in thickness (thicker plates are more common) |
Additionally, surface treatment should be selected based on the environment:
- Ordinary indoor/dry environment: natural anodized finish (low cost, retains silver color of aluminum).
- Outdoor/wet/oily environment: anodizing (thicker oxide layer, enhanced corrosion + wear resistance) or powder coating (color options, stronger weather resistance).
- Food/medical applications: brushed + passivated finish (easy to clean, prevents coating from peeling and contaminating products).
125 aluminum diamond plate 4 8 sheet
.125 Aluminum Diamond Plate 4x8 Sheet has strong wear resistance and is suitable for high-traffic areas and heavy-duty applications.
3003 alloy naturally resists oxidation, ensuring long life even in harsh environments.
- Thickness: 0.125 inches (1/8 inches)
- Size: 4 feet x 8 feet (48 inches x 96 inches)
- Alloy: 3003-H22
- Surface Pattern: Diamond pattern, providing enhanced grip and slip resistance
Applications
- Industrial Flooring: Used in warehouses, factories, and loading docks to provide a safe, non-slip surface.
- Trailers and Trucks: Often used in the construction of trailer floors and side panels due to its light weight and durability.
125 aluminum tread plate 3003 h22
3003-H22 alloy is particularly suited for applications requiring good corrosion resistance, formability, and weldability. 0.125" Aluminum Tread Plate 3003-H22 combines strength, lightweight properties, and aesthetics for a wide range of industrial, commercial, and residential applications.
The 0.125" thick diamond plate provides adequate strength for a variety of applications while remaining lightweight and easy to handle. This makes it particularly suitable for use in environments where weight is a concern, such as in the manufacture of trailers, ramps, and portable equipment.
The diamond pattern embossed on the surface serves a variety of purposes. Mainly, it enhances traction, making the plate an excellent choice for flooring applications, stair treads, and walkways in commercial and industrial settings. The raised diamonds create a textured surface that helps prevent slips, which is critical in high traffic areas or locations prone to moisture.
Haomei 125 aluminum diamond plate available stock sizes
-
0.125" (1/8) thick Aluminum Diamond Brite Plate 3003 H22
Width: 48.00" Length: 120.00" Surface Finish: Bright Finish Pattern: Diamond
-
0.125" (1/8) thick Aluminum Tread Brite Sheet Plate 3003 H22
Width: 48.00" Length: 120.00" Surface Finish: Bright Finish Pattern: 5 Bar
-
0.125" (1/8) thick Aluminum Diamond Plate 3003 H22
Width: 48.00" Length: 120.00" Surface Finish: Highly Polished Pattern: Diamond
-
0.125" (1/8) thick 3003 H22 Aluminum Tread Plate
Width: 48.00" Length: 120.00" Surface Finish: Highly Polished Pattern: 5 Bar
-
0.125" (1/8) thick Aluminum Diamond Brite Plate 3003 H22
Width: 24.00" Length: 48.00" Surface Finish: Bright Finish Pattern: Diamond
-
0.125" (1/8) thick Aluminum Tread Brite Sheet Plate 3003 H22
Width: 24.00" Length: 48.00" Surface Finish: Bright Finish Pattern: 5 Bar
-
0.125" (1/8) thick Aluminum Diamond Plate 3003 H22
Width: 24.00" Length: 48.00" Surface Finish: Highly Polished Pattern: Diamond
-
0.125" (1/8) thick 3003 H22 Aluminum Tread Plate
Width: 24.00" Length: 48.00" Surface Finish: Highly Polished Pattern: 5 Bar
-
0.125" (1/8) thick Aluminum Diamond Brite Plate 3003 H22
Width: 48.00" Length: 96.00" Surface Finish: Bright Finish Pattern: Diamond
-
0.125" (1/8) thick Aluminum Tread Brite Sheet Plate 3003 H22
Width: 48.00" Length: 96.00" Surface Finish: Bright Finish Pattern: 5 Bar
-
0.125" (1/8) thick Aluminum Diamond Plate 3003 H22
Width: 48.00" Length: 96.00" Surface Finish: Highly Polished Pattern: Diamond
-
0.125" (1/8) thick 3003 H22 Aluminum Tread Plate
Width: 48.00" Length: 96.00" Surface Finish: Highly Polished Pattern: 5 Bar
-
0.125" (1/8) thick Aluminum Diamond Brite Plate 3003 H22
Width: 60.00" Length: 120.00" Surface Finish: Bright Finish Pattern: Diamond
-
0.125" (1/8) thick Aluminum Tread Brite Sheet Plate 3003 H22
Width: 60.00" Length: 120.00" Surface Finish: Bright Finish Pattern: 5 Bar
-
0.125" (1/8) thick Aluminum Diamond Plate 3003 H22
Width: 60.00" Length: 120.00" Surface Finish: Highly Polished Pattern: Diamond
-
0.125" (1/8) thick 3003 H22 Aluminum Tread Plate
Width: 60.00" Length: 120.00" Surface Finish: Highly Polished Pattern: 5 Bar
-
0.125" Aluminum diamond Plate 4017
Surface Finish: Bright Finish, Alloy: 4017
